BOXER METAL CHOKE PULLS FOR 32MM & 40MM BING CARBURETORS

Boxer Metal choke pulls are a great upgrade when removing the air box or changing the hand controls on your custom BMW build.

32MM & 40MM BING CARBURETORS 1970-1978:

You will need to retain the cable adjuster off of the stock choke cables that are attached to the carburetors.

  1. Use the supplied drill bit to carefully drill the barrel fitting on the choke body arm.       
  2.  Install the choke rod through the stock BMW cable adjuster and through the drilled barrel fitting.
  3. Move the adjuster up or down to make sure the choke is turning all the way off.

You will not need the supplied barrel fitting.

32MM & 40MM BING CARBURETORS 1979-1995:

You will need to retain the cable adjuster off of the stock choke cables that are attached to the carburetors. You will need to cut the original inner cable to remove these.

  1. Use the supplied barrel fittings and hex key for the choke body arm
  2.  Install the choke rod through the stock BMW cable adjuster and through the drilled barrel fitting.
  3. Move the adjuster up or down to make sure the choke is turning all the way off.

You might have to put a slight bend in the choke rod to help with alignment.

You will not need the supplied drill bit.

We can also supply you with adjusters. https://boxermetal.com/products/boxer-metal-choke-pull-cable-adjuster