AIRBAGIT.COM CROWN VICTORIA 3” LIFT SPACER
These brackets do not fit a 2003-2011 Ford Crown Victoria.
BRACKET ONE:
The mounting holes had to be drilled out to .390” and the excess weld had to be ground down.
BRACKET TWO:
This bracket was assembled with the wrong plates as non of the holes lined up.
I had to machine a plug for the hole and red roll it. I had to do the stud side as well.
Lastly you supplied a part with American hardware for a metric car. I removed all of the 3/8” bolts and replaced them with 8mm.
I have more photos showing me using measuring calipers.